Up to 32 inputs (24 digital & 8 analog) and 16 outputs
5 different expansion modules available
Control voltages: 12/24V DC, 24V DC, 24V AC/DC, 100-240V
AC/DC
48 maximum I/O points with expansion modules
UL & C-UL listed, CE marked and C-tick listed
(IEC61131/VDE0631).
FM approved for Class I, Division 2 Class 1, Zone 2
hazardous locations.
IDEC SmartRelay with
Expansion Modules
FL1C IDEC SmartRelay is no longer just a
timer/counter replacement, but is now equipped with the
functionality of a micro PLC. IDEC has found that customers
require a more sophisticated controller that is reasonably
priced and is easy to program. The FL1C meets that
requirement!
Some of the improved features include a 32-bit processor
that provides faster scan time, double the program memory, and
130 function blocks for programming. The number of counters
and timers that can be programmed into the IDEC SmartRelay is
unlimited. Think of all the components that you can replace
with just one IDEC SmartRelay! It has a 4 x 12 character
backlit LCD screen, shift registers, and cursor keys that can
be configured as inputs. In addition, with the new memory
cartridge, you can define the system security allowing for
more flexibility and versatility.
Seven different base modules are available with voltage
ranges from 12V DC, 24V AC/DC to 100-240V AC/DC. Each CPU
module has 12 built-in I/O points (8 inputs/4 outputs), a
real-time clock, and calendar.
There are five available expansion I/O modules and two
communication modules, which work with any FL1C series IDEC
SmartRelay CPU. Four are combination I/O modules with 4 input
and 4 output points. There are also LonWorks and AS-Interface
communication modules, and a 2-point analog input module.
Maximum I/O configuration for the FL1C IDEC SmartRelay is 24
digital inputs, 16 digital outputs, and 8 analog inputs.
WindLGC is the software that enables you to edit, save, and
print your IDEC SmartRelay programs. The upgrade to version
4.0 provides additional enhancements that allow for greater
ease in using the FL1C series. WindLGC version 4.0 now offers
the ability for the user to program using ladder language.
Other new features include online monitoring, program
comparison, time simulation, and four new function blocks. It
is as easy as clicking and linking the function blocks you
need to get your program up and running. Complicated circuits
can be devised using the convenient features of WindLGC.
Utilize an analog signal as a set point for timers/counters
and a decimal point for analog values. Still available is the
ability to program in function blocks and to save programs in
PDF or JPG format.
The
RY/RM series of relays satisfy applications for lower level switching needs
such as pilot lights or logic level devices. Standard gold plated contacts
prevent contact oxidation from affecting circuit continuity, while optional
Palladium alloy bifurcated contacts reduce contact bounce and allow circuit
switching in the micro-amp range.
Terminated with a
standard footprint of .110" solder/quick-connect terminals or with PCB pins,
the RY/RM series fit into many competitors' sockets as well. Available in
4PDT or two different arrangements of DPDT: the RM2 uses the same socket as
the RY4, but the RY2 is a true two pole relay that occupies half the width
of the four pole. Available options include manual check buttons, LED
indicators, or flanged dust covers for direct surface mounting.
Key Features Are:
High density,
4PDT in a package less than .840" wide
The
RY/RM series of relays satisfy applications for lower level switching needs
such as pilot lights or logic level devices. Standard gold plated contacts
prevent contact oxidation from affecting circuit continuity, while optional
Palladium alloy bifurcated contacts reduce contact bounce and allow circuit
switching in the micro-amp range.